MCR-800 超高頻 RFID 模組 R2000

簡短的介紹:

編號。:MCR-800

快速詳細信息
Place of Origin: Guangdong, China
Brand Name: Leadercolor
Keyword: UHF RFID Module R2000
材料: Metal
Output Power: 0-33 dBm
尺寸: 235x235x57毫米(我們), 260x260x45毫米(歐洲聯盟)
頻率: 全球 840-960Mhz, 美國 902-928mhz, 歐盟 865-868Mhz
讀&寫入範圍: 讀數1-15m可調, 標籤和環境相關
協定: ISO/IEC 18000-6C 和 6B, EPC Class1 Gen2
工作模式: Active Trigger Answer Password Mask mode(optional)
顏色: Red
Reading Distance: 1-15M
Inventory speed: 200pcs/s

產品資訊

產品手冊

常問問題

產品資訊

產品手冊

常問問題

	Feature	Description
1	Based on Indy R2000 chip	RF transceiver is Impinj Indy R2000.
2	High performance anti-collision algorithm	Unique I – Serch multi-tags identification algorithm. Provide the highest efficiency.
3	Optimized algorithm for a little of tags	Better tag response time. Optimized for small tag quantity applications.
4	Dual CPU architecture	Main CPU is responsible for tag inventory, assistant CPU is responsible for data management. Inventory and data transfer are parallel and simultaneous. This feature improves the total performance significantly. Assistant CPU is responsible for generating real random number. Assistant CPU is responsible for system operating surveillance.
5	Fast 4/8 antenna switch inventory	High speed inventory therefore antennas could be switched rapidly. The minimum inventory duration for an antenna is 25ms. Every antenna’s inventory duration is configurable.
6	Two inventory modes	Buffer mode and real time mode. In buffer mode, inventoried tag will be stored in buffer. This mode improves the efficiency of multi tag inventory.
7	Hardware system halt detection	Hardware CPU status surveillance. Run for 24 hours×365 days without system halt.
8	Low operation voltage	The lowest operating supply voltage is 3.7V. Can be powered by lithium battery.
9	Low power consumption	Low-power Mode, few tags only 600mA +/-10%(5V DC Input). Maximum out power only 1.2A +/-10%(5V DC Input).
10	PA health surveillance	PA status surveillance. Make sure PA never works under saturated state. Protected it for long term operation.
11	18000-6B/C full compatible	100% 18000-6B/C compatible. Can be switched rapidly between protocols.
12	18000-6B large data read/write	讀 216 bytes in one time takes less than 500ms. 寫 216 bytes in one time takes less than 3.5s. Can also read/write data with various lengths. Extremely stable (approximate 100% success rate).
13	Antenna connection detection	Detect antenna connection. Protecting RF receiver. Can be cancelled by command.
14	Bistatic antenna configuration	Bistatic antenna configuration improves receive sensitivity by 13dB.
15	High power LED driver	Can output 50mA output current to drive a high power LED.
16	Excellent onboard power system	8 independent power supplied on board. Every unit is supplied independently. Each power supply has soft start function. Improves the stability of the power supply system.
17	Multi-board temperature sensor	Multi point surveillance, Accurate monitoring system operating temperature.
18	Dual backup power output correction	Make sure output power can be fine adjusted. Two mutually backup power parity modules. Unless also damaged, the system can operate normally.
19	Concise and effective command system	Serial communication interface. Simple, convenient and effective for easy integration.
20	Excellent thermal design	All heating devices have thermal structure. A large area of heat sink contact surface. Thermal coupling interface using high thermal conductivity solid materials which are non-volatile under high temperature.

Module Type	MCR-800
RF Channel	Four channel
RF Connector	SMA
天線 Connection Mode	Four Antenna
Interface Connector	Molex 53261-1571
RF Connectors Material	Gold-plated brass
PCB Material	Rogers FR4 gold-plated
Shield Material	鋁

MCR-800 超高頻 RFID 模組 R2000

MCR-800 超高頻 RFID 模組 R2000

簡短的介紹:

編號。:MCR-800

Keyword: UHF RFID Module R2000

產品相關

相關產品

LDR-RF03 UHF RFID 讀寫器集線器

開始輸入並按 Enter 進行搜索